Arthur_Martin AIN635HFK Uživatelský manuál stáhnout pdf (Strana 9)

beginning and then continues to cook at

the desired heating setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch ( comes on). Immediately

touch the correct heat setting. After 3

seconds comes on.

To deactivate the function: change the

heat setting.

Power function

This function makes more power available

to the induction cooking zones. The

function can be activated for the induction

cooking zone only for a limited period of

time. After this time the induction cooking

zone automatically sets back to the highest

heat setting.

Refer to “Technical information”

chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

Power function with a double

ring cooking zone

The function is activated for the inner ring

when the hob senses the cookware with a

smaller diameter than the inner ring. The

function is activated for the outer ring when

the hob senses the cookware with a bigger

diameter than the inner ring.

Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch again

and again until the indicator of a necessary

cooking zone comes on.

To activate the function: touch of the

timer to set the time (00 - 99 minutes).

When the indicator of the cooking zone

starts to flash slowly the time counts down.

To see the remaining time: set the

cooking zone with

. The indicator of the

cooking zone starts to flash quickly. The

display shows the remaining time.

To change the time: set the cooking zone

with

. Touch or .

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

When the time comes to an

end, the sound operates and 00

flashes. The cooking zone

deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone: touch again

and again until the indicator of a necessary

cooking zone comes on.

To activate the function: touch of the

timer. comes on. When the indicator of

the cooking zone starts to flash slowly the

time counts up. The display switches

between and counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts to

flash quickly. The display shows how long

the zone operates.

To deactivate the function: set the

cooking zone with and touch or .

The indicator of the cooking zone goes out.

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

Komentáře k této Příručce

Žádné komentáře